Product Information
* Factory: GR Factory
* Brand: Patek Philippe
* Collection: Nautilus
* Reference: 5711/112P-010
* Version: Emerald-Set Style
* Movement: 324 Automatic Movement
* Crystal: Sapphire Crystal
Technical Specifications
* Measured Case Width: 40.1 mm
* Measured Case Thickness: 8.6 mm
* Movement: 324 Automatic Movement
* Beat Rate: 28,800 BPH
* Crystal: Sapphire Crystal
Note: No weight measurement was provided for this inspection, so weight is not included in this QC report.
Timegrapher Test Results
* Daily Rate: +9 Seconds/Day
* Amplitude: 261°
* Beat Error: 0.0 ms
* Beat Rate: 28,800 BPH
Testing Note
These readings were recorded from the individual watch during its pre-shipment QC inspection.
Mechanical movement readings can vary depending on power reserve, watch position, ambient temperature and testing conditions. The recorded +9 seconds/day represents the performance observed at the time of testing and should not be interpreted as a permanently fixed daily rate.
The +9 seconds/day rate remains within the QC reference range used for this inspection.
324 Automatic Movement Performance
This GR Factory Patek Philippe Nautilus 5711/112P-010 is equipped with a 324 automatic movement operating at 28,800 vibrations per hour.
The recorded results were:
* Daily Rate: +9 Seconds/Day
* Amplitude: 261°
* Beat Error: 0.0 ms
* Beat Rate: 28,800 BPH
The combination of the recorded daily rate, amplitude and zero beat error showed acceptable operation under the test conditions.
In addition to timegrapher readings, pre-shipment QC should include automatic winding, manual winding, crown operation, time setting and date adjustment.
40.1mm Case and 8.6mm Thickness
The inspected watch measured:
* Case Width: 40.1 mm
* Case Thickness: 8.6 mm
The relatively slim 8.6 mm measured thickness is an important part of the overall proportions of this model.
For QC purposes, measurements should be considered together with case assembly, crystal installation, bracelet integration and overall profile rather than evaluated independently.
Sapphire Crystal Inspection
The watch uses a sapphire crystal.
During QC, the crystal should be checked for:
* Surface clarity
* Scratches or visible damage
* Correct installation
* Alignment with the case
* Edge condition
* Clear dial visibility
Because this model uses a visually detailed dial and stone-set exterior design, crystal clarity has a noticeable influence on its overall appearance.
Emerald-Set Style Exterior Inspection
The stone-set design is one of the main visual characteristics of the 5711/112P-010, so the exterior requires more detailed inspection than a standard non-set configuration.
Important QC points include:
* Stone alignment
* Spacing consistency
* Setting security
* Bezel symmetry
* Dial presentation
* Hour-marker and hand alignment
* Case finishing
* Bracelet finishing
* Bracelet-to-case fit
* Clasp operation
Where the exact material or grading of the decorative stones has not been independently verified, the QC report should focus on setting quality, alignment and visual consistency rather than making unsupported gemstone claims.
Overall Finishing and Value Position
The inspected GR Factory 5711/112P-010 presented a good overall impression in terms of case proportions, exterior assembly and visual finishing.
At its price level, one of the more relevant aspects is the balance between movement performance, case dimensions and exterior execution.
The watch does not need to be evaluated solely by factory reputation. Based on this individual QC sample, the overall finishing and handling were consistent enough to make this version worth comparing and considering within its price range.
For a stone-set model in particular, individual QC remains important because alignment and setting consistency can vary from one watch to another.
QC Observations
This GR Factory Patek Philippe Nautilus 5711/112P-010 recorded:
* +9 seconds/day rate
* 261° amplitude
* 0.0 ms beat error
* 28,800 BPH
* 40.1 mm measured width
* 8.6 mm measured thickness
The 324 automatic movement showed acceptable performance under the recorded test conditions.
From an exterior perspective, the overall proportions and finishing of the inspected watch presented well. Considering its price positioning, the combination of movement performance, slim case profile and exterior execution gives this version a reasonable level of value.
For this particular model, special attention should still be given to the stone setting, alignment, bracelet assembly and clasp operation before shipment.
Pre-Shipment QC Inspection
* ✔️ 324 automatic movement checked
* ✔️ Timegrapher readings recorded
* ✔️ +9 seconds/day rate documented
* ✔️ 261° amplitude recorded
* ✔️ 0.0 ms beat error recorded
* ✔️ 28,800 BPH beat rate confirmed
* ✔️ Automatic winding checked
* ✔️ Manual winding checked
* ✔️ Crown and time-setting operation checked
* ✔️ Date function checked
* ✔️ Case width measured at 40.1 mm
* ✔️ Case thickness measured at 8.6 mm
* ✔️ Sapphire crystal inspected
* ✔️ Dial and hand alignment checked
* ✔️ Decorative stone alignment inspected
* ✔️ Stone-setting consistency checked
* ✔️ Bezel and case finishing inspected
* ✔️ Bracelet integration checked
* ✔️ Clasp operation inspected
* ✔️ Overall exterior assembly checked
* ✔️ Final pre-shipment QC inspection completed
