VS Factory Rolex Oyster Perpetual 124300-0008 41mm “Bubbles” Dial — Actual QC Test & Measurements
VS Factory Rolex Oyster Perpetual 124300-0008 41mm “Bubbles” Dial — Actual QC Test & Measurements
This QC report documents an individual VS Factory Rolex Oyster Perpetual 124300-0008 41mm with the distinctive Bubbles / Celebration-style blue dial.
Rather than relying only on listed specifications, this report records the actual Timegrapher readings, physical dimensions and weight measured from the inspected watch. The data can provide a useful reference when comparing another VS Factory 124300 or evaluating differences between individual production pieces.
Actual QC Data
QC Item Actual Result
Factory VS Factory
Reference 124300-0008
Model Oyster Perpetual 41mm
Dial Bubbles / Celebration-Style Blue Dial
Movement 3230 Automatic
Daily Rate -4 sec/day
Amplitude 289°
Beat Error 0.0 ms
Beat Rate 28,800 BPH
Measured Width 41.0 mm
Measured Thickness 11.8 mm
Measured Weight 133.6 g
Crystal Sapphire
Case / Bracelet 904L Steel
Sample note: All Timegrapher readings and physical measurements above were recorded from the individual watch inspected for this report. Mechanical readings, dimensions and weight can vary slightly between individual watches and testing conditions.
What We Found During This QC
This particular VS Factory 124300 sample provides several useful reference points beyond its listed specifications.
1. 3230 Movement Recorded -4 Seconds/Day
The 3230 automatic movement was tested on a Timegrapher and recorded:
-4 sec/day · 289° amplitude · 0.0 ms beat error · 28,800 BPH
The -4 seconds/day daily rate falls within the reference range used for our pre-shipment QC inspection.
The 289° amplitude and 0.0 ms beat error were recorded during the same test session and provide additional context when evaluating the movement rather than relying on the daily rate alone.
These readings represent this individual test. Mechanical movement performance can vary according to power reserve, position, temperature and testing conditions.
2. Actual Case Measurements: 41.0mm × 11.8mm
Caliper measurements taken from this individual watch recorded:
Width: 41.0 mm
Thickness: 11.8 mm
The measured 41.0 mm width corresponds closely with the nominal 41 mm size of this Oyster Perpetual configuration.
The 11.8 mm measured thickness is particularly useful as reference data when comparing the profile of different 124300 versions.
Measurements can vary slightly depending on the exact caliper contact points, so these figures should be treated as measurements of this individual QC sample.
3. Actual Weight: 133.6g
The inspected watch recorded an actual weight of:
133.6 g
Weight can be useful when comparing different versions of the same reference, but it should not be used alone as an indicator of overall quality.
Bracelet configuration, number of links and normal production tolerances can influence the final result. Therefore, 133.6 g should be treated as sample-specific measured data.
Bubbles / Celebration-Style Dial Inspection
The dial is one of the most important QC areas on this particular 124300 because the multi-color bubble pattern contains significantly more visual detail than a conventional single-color Oyster Perpetual dial.
During inspection, attention should be given to:
* Bubble pattern placement
* Individual circle printing
* Color consistency
* Black outlines around the colored elements
* Hour-marker positioning
* Crown logo alignment
* Text printing
* Hand alignment
* Luminous marker application
* Dial surface cleanliness
On a dial with numerous graphic elements, small printing or positioning differences can be easier to identify when compared with a simple monochrome dial.
For this reason, high-resolution dial photographs and close-up QC video are particularly useful for this reference.
3230 Movement Function Test
Timegrapher readings alone do not provide a complete movement assessment.
The 3230 movement inspection also covers:
* Automatic winding
* Manual winding
* Crown engagement
* Time setting
* Hand movement
* Crown position
* Abnormal mechanical resistance
* General movement operation
Because the Oyster Perpetual has no date complication, there is no date wheel or date-change mechanism to inspect.
No obvious functional issue requiring rejection was identified on this individual sample during the QC inspection.
Sapphire Crystal Inspection
The inspected watch uses a sapphire crystal.
The crystal was evaluated for:
* Surface condition
* Clarity
* Installation
* Edge condition
* Visible scratches or chips
* Dial visibility from different viewing angles
Because this reference does not use a date magnifier, the front crystal maintains a relatively clean appearance and there is no Cyclops alignment to evaluate.
904L Steel Case and Bracelet
The watch uses a full 904L steel case and bracelet configuration.
Exterior QC focuses on areas that can vary between individual watches:
* Brushed surface consistency
* Polished surfaces
* Transition between brushed and polished areas
* Case-edge finishing
* Crown operation
* End-link fit
* Bracelet articulation
* Link finishing
* Bracelet-to-case integration
* Clasp closing
* Clasp locking security
These details are more meaningful when inspected on the actual watch than when judging quality only from the factory name.
QC Observations
This individual VS Factory Rolex Oyster Perpetual 124300-0008 recorded:
-4 sec/day · 289° · 0.0 ms · 28,800 BPH
with actual physical measurements of:
41.0 mm width · 11.8 mm thickness · 133.6 g weight
The movement readings were stable under the recorded testing conditions, while the measured dimensions provide useful physical reference data for this specific sample.
The Bubbles / Celebration-style dial deserves additional QC attention because its multi-color graphic design introduces more individual printing and positioning elements than a conventional Oyster Perpetual dial.
On the inspected watch, the overall exterior finishing, dial presentation, case and bracelet assembly showed a good level of consistency, with no obvious issue requiring special attention identified during the final inspection.
Based on this individual sample, the overall quality is good and the version is worth considering, while final evaluation should continue to be based on the actual QC results of each individual watch rather than factory reputation alone.
Pre-Shipment QC Inspection
* ✔️ 3230 automatic movement tested
* ✔️ Timegrapher test completed
* ✔️ -4 seconds/day recorded
* ✔️ 289° amplitude recorded
* ✔️ 0.0 ms beat error recorded
* ✔️ 28,800 BPH confirmed
* ✔️ Automatic winding checked
* ✔️ Manual winding checked
* ✔️ Crown and time-setting operation checked
* ✔️ Case width measured at 41.0 mm
* ✔️ Thickness measured at 11.8 mm
* ✔️ Individual watch weight measured at 133.6 g
* ✔️ Sapphire crystal inspected
* ✔️ Bubbles dial printing inspected
* ✔️ Hour-marker positioning checked
* ✔️ Hand alignment checked
* ✔️ Case finishing inspected
* ✔️ End-link fit checked
* ✔️ Bracelet articulation inspected
* ✔️ Clasp operation checked
* ✔️ Overall exterior condition inspected
* ✔️ Final pre-shipment QC completed
QC Status
Inspection Result: PASS
QC Status: Pre-Shipment Quality Inspection Completed
FAQ
What movement does the VS Factory Rolex 124300 use?
This inspected watch uses a 3230 automatic movement operating at 28,800 BPH.
What were the actual Timegrapher results?
This individual watch recorded -4 seconds/day, 289° amplitude and 0.0 ms beat error during testing.
What are the actual measured dimensions?
The inspected sample measured 41.0 mm in width and 11.8 mm in thickness.
How much does the VS Factory 124300-0008 weigh?
This individual watch measured 133.6 g. Bracelet configuration and individual production tolerances can result in small differences.
What should be checked carefully on the Bubbles dial?
The multi-color pattern makes circle positioning, color consistency, black outlines, hour-marker alignment, printing and dial cleanliness particularly useful QC points.
Is the VS Factory 124300-0008 worth considering?
The individual watch inspected showed good overall movement performance, exterior finishing and assembly. Based on this QC sample, it is a version worth considering, although individual-watch QC remains more useful than relying solely on the factory name.
