WKD Factory Rolex Datejust 41 126331 Free-Sprung 3235
The WKD Factory Rolex Datejust 41 reference 126331 is a 41mm automatic mechanical watch built around a free-sprung 3235 movement configuration with a supplied power reserve of approximately 72 hours.
This WKD version also features a 904L stainless steel construction, a plated fluted bezel, and a newly developed dished dial profile.
Among these specifications, the free-sprung 3235 movement is the most important technical characteristic distinguishing this configuration from conventional regulated 3235-style movements.
41mm Datejust Case
The WKD Datejust uses a 41mm case diameter.
The supplied reference for this configuration is:
126331
The 41mm format provides a larger dial area than traditional smaller Datejust configurations while retaining the familiar combination of central hours, minutes, seconds, and date display.
Free-Sprung 3235 Movement
The central technical feature of this WKD version is its 3235 automatic mechanical movement with a free-sprung balance architecture.
A free-sprung balance differs from a conventional regulator-equipped movement because it does not use a traditional regulator index to change the effective hairspring length.
Instead, rate adjustment is carried out through the balance assembly.
For technical accuracy, this movement should be described as a free-sprung 3235 configuration, rather than as a genuine Rolex-manufactured Calibre 3235.
Approximately 72-Hour Power Reserve
WKD specifies approximately:
72 hours of power reserve
for this 3235 movement configuration.
This corresponds to roughly three days of running time from a fully wound state under the supplied specification.
Actual measured power reserve can vary between individual movements depending on winding level, movement condition, lubrication, regulation, and operating conditions.
For this reason, 72 hours is best presented as the supplied movement specification unless the individual watch has undergone a complete power-reserve test.
Integrated 3235 Architecture
WKD describes this version as using an integrated 3235-style movement architecture.
This is an important distinction from movements that rely primarily on decorative plates or external modifications to imitate the appearance of another calibre.
However, claims regarding complete component interchangeability should be evaluated component by component.
Without actual interchangeability testing, it is more accurate to identify the movement by its architecture and functional configuration rather than state that every individual component is interchangeable.
904L Stainless Steel Construction
The supplied WKD configuration uses 904L stainless steel for its steel exterior components.
904L is an austenitic stainless-steel grade used where corrosion resistance and surface finishing characteristics are important.
The polished and brushed surfaces of the case and bracelet can therefore be considered separately from the plated treatment applied to the fluted bezel.
Fluted Bezel
The Datejust 41 uses a fluted bezel with clearly defined facets around its circumference.
For this WKD version, particular attention is given to the geometry of the individual flutes and the transitions between their polished surfaces.
The supplied version also uses a bright precious-metal-tone plated surface treatment.
Without independent verification of the plating composition, it is more technically accurate to describe this as a:
Platinum-tone plated fluted bezel
rather than assigning a specific precious-metal composition to the coating.
Revised Fluted Bezel Geometry
The geometry of a fluted bezel is influenced by the angle, depth, spacing, and edge definition of each individual flute.
These characteristics affect the way light reflects from the bezel and can create noticeable differences between versions even when their overall dimensions are similar.
For comparison purposes, close-up photographs under the same lighting conditions are more useful than broad claims about similarity.
New Dished Dial Profile
Another characteristic highlighted for this WKD version is its newly developed dished dial profile.
Rather than treating the dial simply as a completely flat decorative surface, the supplied construction emphasizes the shape and transition of the dial surface toward its outer perimeter.
This profile can influence the perceived depth of the dial when viewed through the crystal.
Dial Surface and Finishing
The dial surface has been developed together with the dished profile to create a more dimensional appearance.
Color, texture, and surface reflection can change noticeably depending on lighting conditions and viewing angle.
For this reason, dial comparison is best performed using consistent lighting and camera settings rather than relying on heavily processed photographs.
Date Display
As part of the Datejust architecture, the watch incorporates a date display at 3 o’clock.
The calendar mechanism operates as part of the 3235 movement configuration.
When adjusting the calendar, the crown should be operated gently and should never be forced if unusual resistance is encountered.
Technical Specifications
Specification Details
Factory WKD Factory
Brand Rolex
Collection Datejust 41
Reference 126331
Case Diameter 41mm
Movement 3235 Configuration
Balance Free-Sprung
Movement Type Automatic Mechanical
Movement Architecture Integrated 3235-Style
Power Reserve Approx. 72 Hours – Supplied Specification
Date Display Yes
Steel Material 904L Stainless Steel
Bezel Fluted
Bezel Finish Platinum-Tone Plated
Dial Structure Dished Profile
Free-Sprung vs. Conventional Regulated 3235
The free-sprung balance system is the most important mechanical distinction of this WKD configuration.
A conventional regulated balance generally uses a regulator mechanism to alter the effective hairspring length when adjusting rate.
A free-sprung system instead performs regulation through the balance assembly without a conventional regulator index.
This structural difference does not automatically mean that every free-sprung movement will keep better time.
Actual performance still depends on factors such as:
* Regulation
* Amplitude
* Beat error
* Lubrication
* Assembly quality
* Balance condition
* Positional performance
These measurements are more useful for evaluating an individual movement than the free-sprung designation alone.
72-Hour Power Reserve
The supplied 72-hour power reserve is another important specification for this WKD 3235.
For an individual watch, the most useful way to verify this figure is to fully wind the movement and measure the elapsed time until it stops.
This allows the stated movement specification and the actual tested result to be documented separately.
Dial and Bezel as Version Differences
The movement is not the only point of differentiation on this WKD Datejust 41.
The dished dial profile and revised fluted-bezel geometry are useful exterior comparison points because they can be examined directly in macro photography.
This makes them particularly suitable for a technical product page: readers can compare physical details rather than relying on subjective terms such as “best version” or “highest quality.”
WKD Version Characteristics
The principal supplied specifications for this version are:
41mm Datejust case
Reference 126331
Free-sprung 3235 automatic movement
Approximately 72-hour supplied power reserve
Integrated 3235-style movement architecture
904L stainless steel construction
Plated fluted bezel
Revised bezel geometry
Dished dial profile
Together, these provide the main technical identifiers for the WKD configuration.
Wearing and Care
The automatic movement can be wound through the crown when required.
Calendar and time adjustments should be performed gently. If unusual resistance is encountered, the crown should not be forced.
Strong impacts and powerful magnetic fields should also be avoided.
No verified water-resistance specification was supplied for this configuration, so intentional water exposure should be avoided unless the individual watch has passed an appropriate pressure test.
Frequently Asked Questions
What size is the WKD Datejust 126331?
The supplied configuration has a 41mm case diameter.
What movement does this version use?
It uses a 3235 automatic mechanical movement configuration with a free-sprung balance.
Is it a genuine Rolex Calibre 3235?
No. It should be identified as a free-sprung 3235 configuration, rather than a genuine Rolex-manufactured Calibre 3235.
What does free-sprung mean?
A free-sprung balance does not use a conventional regulator index for rate adjustment. Regulation is instead performed through the balance assembly.
Is free-sprung automatically more accurate?
Not necessarily. Accuracy also depends on regulation, amplitude, beat error, lubrication, assembly quality, and the condition of the individual movement.
What is the supplied power reserve?
WKD specifies approximately 72 hours for this 3235 movement configuration.
What steel is used?
The supplied specification identifies the steel components as 904L stainless steel.
What is different about the dial?
WKD describes this version as using a newly developed dished dial profile, giving the dial additional depth compared with a completely flat surface construction.
What type of bezel does it use?
The watch uses a fluted bezel with a bright precious-metal-tone plated finish.
Are all movement and exterior components interchangeable with genuine parts?
The supplied promotional material makes broad interchangeability claims, but these should be verified component by component before being treated as confirmed technical specifications.
Please identify the merchant when purchasing to prevent buying counterfeit WDK Factory products.
We specialize in offering high-quality replica watches, perfectly combining exquisite craftsmanship with reasonable prices. All products are photographed in real life to ensure accurate and reliable descriptions, helping you make confident and informed purchasing decisions. Please note that watches do not come with the original brand boxes; if needed, they can be purchased separately.
We place great importance on each customer’s shopping experience. Every watch is guaranteed to match the version from the selected factory, with absolutely no bait-and-switch. Before shipping, we provide a complete video package including movement testing and actual product display to ensure accuracy. If you need specific details confirmed, we’re happy to take custom photos If the model you are looking for is not displayed on the website, please contact our professional customer service, and we will assist you in finding it.
Please note that replica watches are not genuine products and may not meet the standards of those seeking absolute perfection. If you have extremely high requirements for details, please carefully consider whether the product is suitable for you. Thank you for your understanding and support—we are committed to providing you with professional service.
Reviews
There are no reviews yet.