Product Information
* Factory: JJZ Factory
* Brand: Hublot
* Collection: Classic Fusion
* Reference: 565.NO.1180.LR
* Movement: HUB1110 Automatic Movement
* Crystal: Sapphire Crystal
Technical Specifications
* Measured Case Width: 38.1 mm
* Measured Case Thickness: 10.2 mm
* Measured Weight: 141 g*
* Movement: HUB1110 Automatic Movement
* Beat Rate: 28,800 BPH
* Crystal: Sapphire Crystal
*The 141 g weight is the actual measurement of the individual watch inspected. Minor differences may occur between individual watches due to production tolerances, strap configuration and assembly.
Timegrapher Test Results
* Daily Rate: -2 Seconds/Day
* Amplitude: 266°
* Beat Error: 0.1 ms
* Beat Rate: 28,800 BPH
Testing Note
These readings were recorded from this individual watch during its pre-shipment QC inspection.
Mechanical movement readings can vary depending on power reserve, watch position, ambient temperature and testing conditions. The recorded -2 seconds/day represents the movement performance observed at the time of inspection rather than a permanently fixed daily rate.
For QC evaluation, daily rate should be considered together with amplitude, beat error and actual functional testing.
HUB1110 Automatic Movement Performance
This JJZ Factory Hublot Classic Fusion 565.NO.1180.LR is equipped with a HUB1110 automatic movement operating at 28,800 vibrations per hour.
The recorded results were:
* Daily Rate: -2 Seconds/Day
* Amplitude: 266°
* Beat Error: 0.1 ms
* Beat Rate: 28,800 BPH
The movement showed consistent operation under the recorded testing conditions.
In addition to timegrapher readings, pre-shipment QC should include automatic winding, manual winding, crown operation, time setting and date operation.
38.1mm Case and 10.2mm Thickness
The individual watch inspected measured:
* Case Width: 38.1 mm
* Case Thickness: 10.2mm
* Measured Weight: 141 g
The 38.1 mm measured width gives this Classic Fusion relatively compact proportions, while the 10.4 mm measured thickness maintains a comparatively slim profile.
The 141 g measured weight should be considered together with the complete case and strap configuration when evaluating the actual feel of the watch.
All three figures are measurements from this individual QC sample rather than guaranteed measurements for every production piece.
Sapphire Crystal Inspection
This configuration uses a sapphire crystal.
During pre-shipment QC, the crystal should be inspected for:
* Surface clarity
* Scratches or visible damage
* Correct installation
* Edge condition
* Alignment
* Clear dial visibility
The crystal should be viewed under several lighting angles to identify any visible surface or installation issues.
Dial and Exterior Inspection
The Classic Fusion uses a relatively clean dial layout, meaning small alignment differences can become more noticeable under close inspection.
QC should therefore focus on:
* Dial surface condition
* Logo and text printing
* Hour-marker alignment
* Hand alignment
* Date-window positioning
* Date numeral centering
* Dial cleanliness
* Crown operation
The overall dial presentation should also be checked from different viewing angles.
Case, Bezel and Screw Alignment
The bezel and exposed screw arrangement are important visual elements of the Classic Fusion design.
Pre-shipment inspection should include:
* Bezel positioning
* Bezel surface condition
* Visible screw positioning
* Case-edge finishing
* Surface transitions
* Crown alignment
* Case-to-strap connection
Rather than assessing only one detail, the bezel, case and dial should be viewed together to determine whether the overall assembly is visually balanced.
Strap and Clasp Inspection
The strap system also plays an important role in the overall wearing experience.
QC should include:
* Strap surface condition
* Strap alignment
* Case-to-strap fit
* Stitching condition where applicable
* Clasp operation
* Clasp locking security
* Overall wearing balance
The clasp should open and close correctly and remain securely locked after fastening.
QC Observations
This JJZ Factory Hublot Classic Fusion 565.NO.1180.LR recorded:
* -2 seconds/day
* 266° amplitude
* 0.1 ms beat error
* 28,800 BPH
* 38.1 mm measured width
* 10.4 mm measured thickness
* 141 g measured weight
The HUB1110 automatic movement showed consistent performance under the recorded testing conditions.
From a dimensional perspective, the 38.1 mm width and 10.4 mm thickness create relatively compact and slim proportions, while the measured 141 g weight gives useful reference for the actual physical configuration of this individual watch.
For this model, final QC should place particular attention on dial alignment, bezel and screw presentation, sapphire crystal condition, case finishing, strap integration and clasp operation.
As with other factory-produced versions, the actual individual QC result provides a more useful assessment than relying only on the factory name.
Pre-Shipment QC Inspection
* ✔️ HUB1110 automatic movement checked
* ✔️ Timegrapher readings recorded
* ✔️ -2 seconds/day rate documented
* ✔️ 266° amplitude recorded
* ✔️ 0.1 ms beat error recorded
* ✔️ 28,800 BPH beat rate confirmed
* ✔️ Automatic winding function checked
* ✔️ Manual winding function checked
* ✔️ Crown operation checked
* ✔️ Time-setting function checked
* ✔️ Date operation checked
* ✔️ Case width measured at 38.1 mm
* ✔️ Case thickness measured at 10.4 mm
* ✔️ Individual watch weight measured at 141 g
* ✔️ Sapphire crystal inspected
* ✔️ Dial surface inspected
* ✔️ Hour-marker and hand alignment checked
* ✔️ Date-window positioning inspected
* ✔️ Bezel condition checked
* ✔️ Visible screw positioning inspected
* ✔️ Case finishing checked
* ✔️ Strap-to-case integration inspected
* ✔️ Clasp operation and locking checked
* ✔️ Overall exterior assembly inspected
* ✔️ Final pre-shipment QC inspection completed
